The SuperMAC™ case is a smooth surface case with a 19" wide and 24" deep EIA standard rack.
The SuperMAC™ case is our most compact container with the option of a Lock 'N Load removable rack. The SuperMAC™ case strategically uses every inch of space, allowing ample room for wiring and equipment integration - all while providing medium duty protection. The optional removable rack system slides open as easily as a file drawer, for full access to equipment.
The SuperMAC™ case is ideal when you need vibration and shock protection for sensitive electronic equipment but don't have enough space for a Classic Rack Case.
3U, 4U, 5U, 7U, 9U, 11U and 14U
> 40 - 70
> 25 - 200 lbs
> 1" sway space for the ability to decelerate shock
Shock Isolation Mounts are a patent pending shock mount design made of a heavy-duty rubber that is inserted into the case body at the corners to provide a flexible, shock absorbing attachment for the rack frame.
SuperMAC™ cases are fully configurable and made to order using the list of options. They can also be customized by our Technical Sales solution team.
Back Lid Depth
Cobalt Black Plate Zinc
Supermac rack cases come standard with black zinc non-locking hardware
Black Oxide Plated Stainless Steel
Upgrade to black oxide coated stainless steel for corrosion resistant hardware.
Lift/Tie Down Rings
Black plated Stainless Steel (1000lb/ring rating) for Hoisting/tie down points, 2" (50 mm) diameter clearance for hooks, spring loaded, pivots 180 degrees.
Holds four (4) casters on one (1) machined aluminum extrusion with mounting hardware (5" lid only).
Caster storage is not available in rear lid when when pouch is chosen in rear lid.
Locking Removable 3.5" and 5" Bottom Casters
Enhances the bottom panel strength of rack cases, while providing button release of swivel casters. Choice of 3.5" or 5.0" wheel diameters"
Lid Storage Pouch
Zippered pouch for storing cables and accessories in front and/or rear lids. Requires a 5" lid. Pouch not available in 5" rear lid when caster storage option is chosen.
Adjustable Vertical Supports
These aluminum supports installed onthe side walls of the rack, top to bottom.
Adjustable Horizontal Supports
These aluminum supports installed on the side of the rack, front to back.
Fixed Bottom Support Rails
These aluminum supports installed on the bottom of the rack, front to back.
Heavy Duty Shock System
Cylindrical Shock Mounts isolate equipment from vibration as well as impact forces. Shock mounts vary in weight ratings and in quantities used depending on protection requirements - from delicate equipment to rugged electronics.
Shock Isolation Mounts
Patent pending shock mount design made of a heavy-duty rubber that is inserted into the case body at the corners to provide a flexible, shock absorbing attachment for the rack frame.
Pelican engineers have years of experience in designing a case from concept to execution. You can request a call from any of our custom case experts to get your project started. Fill out the form below to request a call.