The ProRack™ case is a smooth roto molded case with a 19" wide and 18" deep EIA standard rack.
ProRack™ cases are the ideal option when you need a lightweight, space-efficient, front and rear opening container, but not a shock mounted system. Add accessories such as coupling catches for locking stability, removable casters or extra threaded rack clips to suit your exact needs.
A ProRack™ case is the toughest small case available for basic protection from rain, immersion, dust and impact.
4U, 6U, 8U, 9U, and 14U
80 - 120
Up to 75 lbs.
No sway space
ProRack™ cases do not have shock mounts. The rack frame is mounted directly to the case.
ProRack™ cases are fully configurable and made to order using the list of options.
Back Lid Depth
© 2021 Pelican Products, Inc. |
Cobalt Black Plate Zinc
Zinc is low cost with strong strength. This hardware is colored shiny for visual effect.
Black Oxide Plated Stainless Steel
Stainless steel is corrosion resistant. This hardware is colored matte for visual effect.
Lift/Tie Down Rings
Black plated Stainless Steel (1000lb/ring rating) for Hoisting/tie down points, 2" (50 mm) diameter clearance for hooks, spring loaded, pivots 180 degrees.
Holds four (4) casters on one (1) machined aluminum extrusion with mounting hardware (5" lid only).
Caster storage is not available in rear lid when when pouch is chosen in rear lid.
Locking Removable 3.5" and 5" Bottom Casters
Enhances the bottom panel strength of rack cases, while providing button release of swivel casters. Choice of 3.5" or 5.0" wheel diameters
Lid Storage Pouch
Zippered pouch for storing cables and accessories in front and/or rear lids. Requires a 5" lid. Pouch not available in 5" rear lid when caster storage option is chosen.
Pressure Relief Valve (PRV) with Closed Loop Gasket
The manual PRV button is used to maintain correct pressure differential. Pressure range: +/- 0.5 PSID
Lockable Cable Catch
One (1) set of four (4) cables per case. Allows the case to be padlocked shut. The cable is made of tamper-resistant aircraft steel. Padlock Not Included.
Adjustable Vertical Supports
These aluminum supports installed onthe side walls of the rack, top to bottom.
Adjustable Horizontal Supports
These aluminum supports installed on the side of the rack, front to back.
Fixed Bottom Support Rails
These aluminum supports installed on the bottom of the rack, front to back.
Heavy Duty Shock System
Cylindrical Shock Mounts isolate equipment from vibration as well as impact forces. Shock mounts vary in weight ratings and in quantities used depending on protection requirements - from delicate equipment to rugged electronics.
Shock Isolation Mounts
Patent pending shock mount design made of a heavy-duty rubber that is inserted into the case body at the corners to provide a flexible, shock absorbing attachment for the rack frame.
Pelican engineers have years of experience in designing a case from concept to execution. You can request a call from any of our custom case experts to get your project started. Fill out the form below to request a call.