The Classic Rack case is a smooth finished roto case with a 19" wide EIA standard rack and a variety of rack depths including 17", 18", 20", 23", 25", 28", 33".
Extra rugged, rotomolded Pelican™ Classic Rack cases have demonstrated their strength thousands of times over by saving ultra-fragile equipment from damage during transport. It has the option for a Lock 'N Load, removable rack. It is the strongest, most secure rack in the industry. Our precision - tuned, elastomeric, shock mount systems provide maximum shock and vibration protection for ultra-fragile equipment.
Classic Rack cases are a requirement when you are transporting valuable, highly fragile equipment that needs to get there intact. Nothing protects better than a Pelican™ Classic Rack Case.
3U, 4U, 5U, 6U, 7U, 9U, 10U, 11U, 14U, 21U, and 26U
15 - 30
8-shock mounts: Up to 170 lbs.
16-shock mounts: 160 - 200 and 200 - 340 lbs
2" for maximum ability to decelerate shock forces and provide airflow
Cylindrical Shock Mounts isolate equipment from vibration as well as impact forces. Shock mounts vary in size depending on protection requirements - from delicate equipment to rugged electronics.
Classic Rack cases are fully configurable and made to order. They can also be customized by our Technical Sales solution team. Call if you need a 1U extension to any of these standard U sizes.
Back Lid Depth
Cobalt Black Plate Zinc
Classic rack cases come standard with black zinc non-locking hardware
Black Oxide Plated Stainless Steel
Upgrade to black oxide coated stainless steel for corrosion resistant hardware.
Lift/Tie Down Rings
Black plated Stainless Steel (1000lb/ring rating) for Hoisting/tie down points, 2" (50 mm) diameter clearance for hooks, spring loaded, pivots 180 degrees.
Holds four (4) casters on one (1) machined aluminum extrusion with mounting hardware (5" lid only).
Caster storage is not available in rear lid when when pouch is chosen in rear lid.
Locking Removable 3.5" and 5" Bottom Casters
Enhances the bottom panel strength of rack cases, while providing button release of swivel casters. Choice of 3.5" or 5.0" wheel diameters
Lid Storage Pouch
Zippered pouch for storing cables and accessories in front and/or rear lids. Requires a 5" lid. Pouch not available in 5" rear lid when caster storage option is chosen.
Pressure Relief Valve (PRV) with Closed Loop Gasket
The manual PRV button is used to maintain correct pressure differential. Pressure range: +/- 0.5 PSID
Lockable Cable Catch
One (1) set of four (4) cables per case. Allows the case to be padlocked shut. The cable is made of tamper-resistant aircraft steel. Padlock Not Included.
Adjustable Vertical Supports
These aluminum supports installed onthe side walls of the rack, top to bottom.
Adjustable Horizontal Supports
These aluminum supports installed on the side of the rack, front to back.
Fixed Bottom Support Rails
These aluminum supports installed on the bottom of the rack, front to back.
Heavy Duty Shock System
Cylindrical Shock Mounts isolate equipment from vibration as well as impact forces. Shock mounts vary in weight ratings and in quantities used depending on protection requirements - from delicate equipment to rugged electronics.
Shock Isolation Mounts
Patent pending shock mount design made of a heavy-duty rubber that is inserted into the case body at the corners to provide a flexible, shock absorbing attachment for the rack frame.
Pelican engineers have years of experience in designing a case from concept to execution. You can request a call from any of our custom case experts to get your project started. Fill out the form below to request a call.