1550 Protector Case

ACCESSORIES

1550TPKIT
TrekPak Case Divider Kit

1550TPKIT - TrekPak Case Divider Kit

You’ve always trusted Pelican™ to protect your sensitive gear. Now with our exclusive TrekPak™ system you can kit out your case with the precision your equipment deserves. At just 7/16” (1.1 cm) thick these rigid panels form a precise grid of protection without wasting any space. The panels are held firmly in place with steel U-pins, which means you can reconfigure your TrekPak system- even in the field.

Trimming the dividers is a snap. The included double blade cutting tool makes a perfect cut every time. Together with the included bottom foam and convoluted lid foam, the TrekPak system forms a 360-degree cocoon inside your Pelican case.

Kit includes:

Two perimeter wall panels
Five dividers (lengths may vary)
Twenty (20) pins and pull tabs
One cutter tool
Convoluted lid foam and bottom foam

1555
Padded Divider Set

1555 - Padded Divider Set

1551
4 pc. Replacement Foam Set

1551 - 4 pc. Replacement Foam Set

1552
Pick N Pluck™ Sections Only (set of 2)

1552 - Pick N Pluck™ Sections Only (set of 2)

1553
Replacement O-ring

1553 - Replacement O-ring

1550PF
Special Application Panel Frame

1550PF - Special Application Panel Frame

1510TPDIV
Extra TrekPak Dividers

1510TPDIV - Extra TrekPak Dividers

Two divider strips 5" x 23" (12.7 x 58.42 cm)

1507
Quick Mounts - set of 4

1507 - Quick Mounts - set of 4

1506TSA
TSA Lock

1506TSA - TSA Lock

1500D
Desiccant Silica Gel

1500D - Desiccant Silica Gel

DESCRIPTION

Pelican™ Protector Case™

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

Personalized nameplate service available
Watertight, crushproof, and dustproof
2 level Pick N Pluck™ with convoluted lid foam
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
Comfortable rubber over-molded handle
Easy open Double Throw latches
Lifetime Guarantee of Excellence
O-ring seal
Open cell core with solid wall design - strong, light weight
Stainless steel hardware and padlock protectors
TrekPak Kit for 1550

SPECS

INTERIOR (L X W X D)
18.63" x 14.18" x 7.72" (47.3 x 36 x 19.6 cm)

EXTERIOR (L X W X D)
20.66" x 17.20" x 8.40" (52.5 x 43.7 x 21.3 cm)

LID DEPTH: 1.75" (4.4 cm)

BOTTOM DEPTH: 5.87" (14.9 cm)

TOTAL DEPTH: 7.62" (19.4 cm)

INT VOLUME: 1.18 ft³ (0.033 m³)

WEIGHT WITH FOAM: 11.90 lbs (5.4 kg)

WEIGHT EMPTY: 10.58 lbs (4.8 kg)

BUOYANCY: 69.89 lbs (31.7 kg)

FOAM LAYERS: Layer 1 (Lid): 1.75" - Convolute / Layer 2 (Base): 0.75" - Pad / Layer 3 (Base): 2.50" - Pick N Pluck / Layer 4 (Base): 2.50" - Pick N Pluck

BODY: Polypropylene

LATCH: ABS

O-RING: Polymer

PINS: Stainless Steel

FOAM: 1.3 lb Polyurethane

PURGE BODY: ABS

PURGE VENT: 3 Micron Hydrophobic Non-Woven

MINIMUM TEMPERATURE: -40° F (-40 ° C)

MAXIMUM TEMPERATURE: 210° F (99 ° C)

SUPPORT

For warranty information, see our
Guarantee of Excellence

For additional support,
contact us here

Create Product PDF

CERTIFICATES

  1550 DEF STAN 81-41
  1550 IP67
  1550 MIL STD 810F
  MIL-STD-810G Fungus Test

CONFIGURATIONS

1550TP
With TrekPak Divider System

1550TP - With TrekPak Divider System

Two perimeter pieces
Two 13.75 inch dividers
Two 20 inch dividers
One 6 inch divider
Cutting Tool
20 pins with 20 red pull tabs

Learn more about TrekPak

1554
With Padded Dividers

1554 - With Padded Dividers

1550NF
No Foam

1550NF - No Foam

1550WF
With Foam

1550WF - With Foam

FOAM LAYERS: Layer 1 (Lid): 1.75" - Convolute / Layer 2 (Base): 0.75" - Pad / Layer 3 (Base): 2.50" - Pick N Pluck / Layer 4 (Base): 2.50" - Pick N Pluck

Design your Own Foam
at pelicanfoam.com