1745 Air Long Case

1745 Air Long Case

$654.95
 
 
 
 
SKU: 017450-0001-110
 

Overview

Nous avons étendu notre gamme de valises Pelican™ Air, afin que vous puissiez désormais protéger vos équipements longs à l'intérieur de la valise la plus robuste et la plus légère au monde. Mesurant 118 cm de long, avec des roues intégrées, et un poids 40 % plus léger que les autres valises en polymères, la valise Pelican™ Air 1745 facilite le transport et offre l'espace idéal pour protéger votre équipement de sondage, vos armes à feu, vos trépieds de caméra et autres équipements longs.

Avec un espace interne de 20 cm, avec ou sans la mousse Pick N Pluck™, la valise Pelican™ Air 1745 est la valise longue la plus profonde de notre gamme. Elle permet d'empiler plusieurs appareils sur les couches inférieures et supérieures ou simplement la couche supérieure, pour protéger correctement chaque équipement long.

La valise Pelican™ Air 1745 est également la première valise Pelican™ Air équipée de loquets Press and Pull™, testés dans des situations de pression et d'impact extrêmes. Ces loquets maintiennent le couvercle fermé en cas de manipulation brutale, mais ils sont faciles à ouvrir à l'arrivée.

La valise Pelican™ Air 1745 : Les longues distances deviennent plus faciles.

  • Waterproof, crushproof, dustproof
  • Super-light proprietary HPX²™ Polymer - up to 40% lighter
  • Press and Pull™ Latches
  • Quiet rolling stainless-steel bearing wheels
  • User-customizable Pick N Pluck™ foam
  • Fold down over-molded handle
  • Waterproof O-ring seal
  • Business card holder
  • Automatic pressure equalization valve - balances interior pressure, keeps water out
  • Stainless steel padlock protectors
  • IP67 & MIL-SPEC certified
pelican 1745 surveyor construction tripod case
pelican 1745 dslr camera long case

Pelican Air Cases

PEL Air Lightweight

40% Lighter than Other Polymer Cases

Engineered for easy transport without compromising strength or protection.

PEL Air PBLatches

Press & Pull™ Latches

Secure, easy-open latches that stay shut under pressure and open only when you need them.

PEL Air Waterproof

Waterproof, Dustproof, Crushproof

Built to protect your gear against the harshest conditions

Protection, Engineered Lighter.

Pelican Air Logo

Up to 40% lighter. The same uncompromising protection. Built for those who never stop moving. Made in USA.

Person carrying a Pelican case near a tent

The Air Difference

Same Protection. Smarter Engineering.

Five decades of engineering obsession produced one breakthrough: proprietary HPXA resin. The same relentless pursuit that built the industry standard — now applied to making it up to 40% lighter. This is what innovation looks like when heritage drives it.

Close up of watertight seal on green Pelican case

Built Without Compromise

Watertight. Crushproof. Dustproof. Lighter.

The standards that define every Pelican case — Air holds all three without exception. IP67-rated waterproof. Crushproof. Dustproof. The weight changed, but the uncompromising protection didn't. That's not a trade-off. That's engineering.

Configuring camera gear inside a custom foam Pelican case

Built for the Pace You Keep

Organized to Move. Ready to Perform.

Pick your base protection with Pick N' Pluck foam, padded dividers, or TrekPak dividers — each configuring precisely around your kit. Press & Pull™ latches open with a touch when every second counts. Tailored protection, built for the pace you keep. Backed by our Lifetime Guarantee of Excellence.

Pelican Logo

The Brand That Invented Protection

Only
Pelican.

Only Pelican has the materials science, the field-tested standards, and the relentless pursuit to build Air. We didn't just invent protection. We refined it.

Measurements

Download

Exterior


Inches: 46.69 x 19.36 x 8.73" (118.59 x 49.17 x 22.17 cm)

Padlock Hole Diameter: 0.31" (0.79 cm)

Weights


Weight No Foam: 17.26 lbs (7.83 kg)

Weight With Foam: 21.06 lbs (9.55 kg)

Weight: 20 lbs (9.07 kg)

Interior


Inches: 44.01 x 16.77 x 7.94" (111.79 x 42.6 x 20.17 cm)

Measurements


Int Volume: 3.39ft³ (0.1m³)

Lid Depth: 2.51" (6.38 cm)

Bottom Depth: 5.43" (13.79 cm)

Total Depth: 7.94" (20.17 cm)

Materials


Body Material: Proprietary Polypropylene Blend

Latch Material: ABS

O Ring Material: EPDM

Purge Body Material: ABS

Purge O Ring Material: 70 Shore Nitrile

Purge Vent Material: Hi-Flow Gore-Tex 3 Micron Hydrophobic Non-Woven

Temperatures


Maximum Temperature: 140°F (60°C)

Minimum Temperature: 0°F (-18°C)

Support

guarantee
For warranty information, see our
Guarantee of Excellence
support
For additional support,
contact us