1780 Protector Transport Case

CONFIGURATIONS

1780
With Foam

1780 - With Foam

FOAM LAYERS: Layer 1 (Lid): 1.58" - Pad / Layer 2 (Base): 1.30" - Pad / Layer 3 (Base): 3.00" - Diced Lid / Layer 4 (Base): 3.00" - Diced Lid / Layer 5 (Base): 3.00" - Diced Base / Layer 6 (Base): 3.00" - Diced Base

1780NF
No Foam

1780NF - No Foam

Design your Own Foam
at pelicanfoam.com

DESCRIPTION

Pelican™ Protector Case™

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

Personalized nameplate service available
4 strong polyurethane wheels with stainless steel bearings
The new class of XXL Pelican Transport Cases
Watertight, crushproof, and dustproof
50/50 lid-to-base ratio for easy loading
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
Completely detachable lid for full access
Easy open Double Throw latches
Fold down handles
Lifetime Guarantee of Excellence
O-ring seal
Open cell core with solid wall design - strong, light weight
Stainless steel padlock protectors

SPECS

INTERIOR (L X W X D)
41.12" x 21.54" x 14.88" (104.4 x 54.7 x 37.8 cm)

EXTERIOR (L X W X D)
44.90" x 25.32" x 16.50" (114 x 64.3 x 41.9 cm)

LID DEPTH: 7.58" (19.3 cm)

BOTTOM DEPTH: 7.30" (18.5 cm)

TOTAL DEPTH: 14.88" (37.8 cm)

INT VOLUME: 7.63 ft³ (0.216 m³)

WEIGHT WITH FOAM: 49.00 lbs (22.2 kg)

WEIGHT EMPTY: 38.40 lbs (17.4 kg)

BUOYANCY: 500.00 lbs (226.8 kg)

FOAM LAYERS: Layer 1 (Lid): 1.58" - Pad / Layer 2 (Base): 1.30" - Pad / Layer 3 (Base): 3.00" - Diced Lid / Layer 4 (Base): 3.00" - Diced Lid / Layer 5 (Base): 3.00" - Diced Base / Layer 6 (Base): 3.00" - Diced Base

BODY: Polypropylene

LATCH: EXL

O-RING: Polymer

PINS: Stainless Steel

FOAM: 1.3 lb Polyurethane

PURGE BODY: ABS

PURGE VENT: 3 Micron Hydrophobic Non-Woven

MINIMUM TEMPERATURE: -40° F (-40 ° C)

MAXIMUM TEMPERATURE: 210° F (99 ° C)

WHEELS: 4

SUPPORT

For warranty information, see our
Guarantee of Excellence