Introducing the Pelican™ 9455 Remote Area Light

The World's First Certified Class I Div 1 Remote Area Light

The Portable Light You Need For The Danger Zone

Now you can take portable lighting to hazardous areas around the globe. The Pelican™ 9455 remote area lighting system (RALS) is our first area light that is Class I Division 1 approved allowing you to work where flammable gases, vapors or liquids are present. Plus it carries ATEX Zone 0 and IECEx ia certificates so it is safe to use internationally.

The 9455 RALS is certified for CID1 Hazardous Areas where volatile substances can exist all of the time or some of the time under normal operating conditions.



HAZARDOUS AREA ELECTRICAL GUIDELINES
CLASS I
Flammable Gases, Vapors, or Liquids

(Acetylene, Hyrdogen, Ethylene, Propane)

Oil Refinery
Paint Warehouse
Spray Booth
Offshore Oil Rig
Division 1

(Hazard Likely)

Division 2

(Hazard Not Likely)

CLASS II
Combustible Dusts

(Metals[Div.1 only], Coal, Grain)

Coal Mine
Munitions Factory
Grain Silo
Hay Storage Facility
Division 1

(Hazard Likely)

Division 2

(Hazard Not Likely)

CLASS III
Ignitable Fibers & Flyings

(Machined Magnesium)

Paper Mill
Woodworking Facility
Textile Mill
Cotton Gin
Division 1

(Hazard Likely)

Division 2

(Hazard Not Likely)

DIVISION 1

Where volatile substances can exist all of the time or some of the time under normal operating conditions.


DIVISION 2

Where volatile substances are not likely to exist under normal operating conditions.

Uncompromising Output

Most safety certified lights use lower lumens to minimize heat generated by the lamp module. The result is a dimmer light and unsafe work areas. The Pelican™ 9455 RALS delivers on all cylinders without compromise. Our engineers developed the Pelican™ 9455 RALS to output up to 1600 lumens of clean, bright light that meets hazardous area requirements at the same time.

See All The Nooks and Crannies

The Pelican™ 9455 RALS projects a 125° beam spread that can help prevent workplace injuries. Conventional flashlights produce a narrow beam lighting up only small concentrated areas. The 125° beam spread from the Pelican™ 9455 RALS lights up the entire work area so you see the work at hand and the peripheral hazards around you, leading to better situational awareness.

Charged For The Extra Mile

The Pelican™ 9455 RALS extracts 10 hours on a single charge, while also maintaining peak brightness on the job. You'll never be caught in the dark- the flashing low battery warning gives you 30 minutes of reserve light.

It Adjusts To Your Work

From confined spaces to tight manholes, nothing stops the Pelican™ 9455 RALS from illuminating the work site. And with an adjustable mast that reaches nearly 3 feet high and a head that rotates 360°, you have full control of the light.

Pelican™ 9455 RALS Specification

BATTERIES (included)

NiMH

LIGHT MODES

High / Low / Flashing

CERTIFICATIONS

Class I, Division 1
IECEx ia
ATEX Zone 0

BRIGHTNESS

1600 Lumens (high)
800 Lumens (low)

RUN TIME

5 hrs. High | 10 hrs. Low

BEAM SPREAD

125°

NUMBER OF LEDs

10

LAMP HEADS

1

WEIGHT

16.00 lbs (7.3 kg)

BATTERY LEVEL INDICATOR

Low battery warning

DIMENSIONS (CM)

Head
8.26" x 5.71" x 1.97"
(21 x 14.5 x 5 cm)

Closed
15.35" x 7.87" x 9.06"
(39 x 20 x 23 cm)

Light Head Height-Max
31.50" (80 cm)

COLORS

Be in the Know   sign up to get the latest from Pelican